Demonstration of the advantages of using bamboo-like nanotubes for electrochemical biosensor applications compared with single walled carbon nanotubes

The modification of glassy carbon electrodes with random dispersions of nanotubes is currently the most popular approach to the preparation of carbon nanotube modified electrodes. The performance of glassy carbon electrodes modified with a random dispersion of bamboo type carbon nanotubes was compared with single walled carbon nanotubes modified glassy carbon electrodes and bare glassy carbon electrodes. The electrochemical performance of all three types for electrode were compared by investigating the electrochemistry with solution species and the oxidation of guanine and adenine bases of surface adsorbed DNA. The presence of edge planes of graphene at regular intervals along the walls of the bamboo nanotubes resulted in superior electrochemical performance relative to SWNT modified electrodes from two aspects. Firstly, with solution species the peak separation of the oxidation and reduction waves were smaller indicating more rapid rates of electron transfer. Secondly, a greater number of electroactive sites along the walls of the bamboo-carbon nanotubes (BCNTs) resulted in larger current signals and a broader dynamic range for the oxidation of DNA bases.

Microprocessor-based insulin delivery device with amperometric glucose sensing

This paper details the design of a closed-loop insulin delivery device, consisting of a glucose sensing circuit, and a basic microprocessor-based syringe pump. The glucose sensing circuit contains the required components to interface with CGMS's glucose sensor assembly, while the syringe pump design uses microprocessor to allow flexible control over the pump driver. Instrumentation developed in this paper provides a ready reference to other researchers on the construction of a closed-loop insulin delivery apparatus with amperometric glucose sensor.

Parameter sensitivity analysis of surface plasmon resonance biosensor through numerical simulation

Surface based analytical tools have gained more importance for rapid, sensitive and label-free monitoring of molecular recognition events. Surface plasmon resonance (SPR) has played a prominent role in real time monitoring of surface binding events. SPR is increasing its significance especially for the study of ultrathin dielectric layer. This paper investigates the role of thin films of gold, silver and aluminium for protein detection in SPR biosensors. It is shown that the sensitivity, which is indicated by the shift of plasmon dip, is not linearly related to the thickness of protein but quadratic over a specific range. The approach involves a plot of a reflectivity curve as a function of the angle of incidence.

3-D modeling of a carbon nanotube cantilever biosensor

In this paper, 3-D finite element modeling and simulations are carried out to investigate the bending deformation of a single-walled carbon nanotube cantilever biosensor due to mass attached, and addition of a nano-scale particles to the beam tip resulting from the bioparticle detection. In addition, an algorithm for an electrostaticmechanical coupled system is developed. The computed results are in excellent agreement with the well known electrostatic equations that govern the deformation.

Design and analysis of a cantilever biosensor based on a boron nitride nanotube

In this paper, we introduce a single-walled boron nitride nanotube (SWBNNT)-based cantilever biosensor, and investigate its bending deformation. The BNNT-based cantilever is modelled by accounting that the surface of the cantilever beam is coated with the antibody molecule. We have considered two main approaches for the mechanical deformation of the BNNT beam. The first one is differential surface stress produced by the binding of biomolecules onto its surface, and the second one is the charge released from the biomolecular interaction. In addition, other parameters including length of beam, variation of beam’s location and chiralities of the BNNT have been taken into consideration to design the cantilever biosensor. The computed results are in good agreement with the well known electrostatic equations that govern the deformation of the cantilever.

A micromechanical biosensor with interdigitated capacitor readout

The growing demands of high-throughput, accurate and fast response biological or chemical sensors are driving the development of new detection technologies. This paper presents a micromechanical biosensor with capacitive read-out method. The proposed biosensor design consists of a fixed-fixed beam attached to an interdigitated capacitor. Implementation of the interdigitated capacitor design improves the sensitivity of the biosensor. The effects of the electrode thickness, length and the number of electrode fingers on the change of capacitance are investigated. The results show that the percentage change of capacitance is proportional to the number of the electrode fingers. Similarly, the increase in the length of the electrodes results in an increase in the percentage change of the capacitance. However, as the thickness of the electrode increases, the percentage change of the capacitance decreases.

Design of a high sensitive double-gate field-effect transistor biosensor for DNA detection

The study of interactions between organic biomolecules and semiconducting surfaces is an important consideration for the design and fabrication of field-effect-transistor (FET) biosensor. This paper demonstrates DNA detection by employing a double-gate field effect transistor (DGFET). In addition, an investigation of sensitivity and signal to noise ratio (SNR) is carried out for different values of analyte concentration, buffer ion concentration, pH, reaction constant, etc. Sensitivity, which is indicated by the change of drain current, increases non-linearly after a specific value (∼1nM) of analyte concentration and decreases non-linearly with buffer ion concentration. However, sensitivity is linearly related to the fluidic gate voltage. The drain current has a significant effect on the positive surface group (-NH2) compared to the negative counterpart (-OH). Furthermore, the sensor has the same response at a particular value of pH (5.76) irrespective of the density of surface group, although it decreases with pH value. The signal to noise ratio is improved with higher analyte concentrations and receptor densities.

Variable incidence angle localized surface plasmon resonance graphene biosensor

This paper investigates the enhancement of sensitivity of variable incidence angle LSPR biosensor by monitoring biomolecular interactions of biotin-streptavidin with gold thin film. The investigation is carried out by means of introducing an additional layer of graphene sheet on top of gold layer (graphene biosensor) and using different coupling configuration of laser beam. The sensitivity, which is indicated by the shift of plasmon resonance angle, increases with graphene deposited onto the gold layers and is linearly related with the number of graphene layers. In addition, an investigation of the shift of plasmon dip is carried out for two different analyte interfaces: air and water. It is found that graphene biosensor has better sensitivity for triangular prism, higher prism angle, and water interface. The evaluation approach involves a plot of a reflectivity curve as a function of the angle of incidence while the operating wavelength is kept fixed.

Wireless instantaneous neurotransmitter concentration system-based amperometric detection of dopamine, adenosine, and glutamate for intraoperative neurochemical monitoring - laboratory investigation

Object  In a companion study, the authors describe the development of a new instrument named the Wireless Instantaneous Neurotransmitter Concentration System (WINCS), which couples digital telemetry with fast-scan cyclic voltammetry (FSCV) to measure extracellular concentrations of dopamine. In the present study, the authors describe the extended capability of the WINCS to use fixed potential amperometry (FPA) to measure extracellular concentrations of dopamine, as well as glutamate and adenosine. Compared with other electrochemical techniques such as FSCV or high-speed chronoamperometry, FPA offers superior temporal resolution and, in combination with enzyme-linked biosensors, the potential to monitor nonelectroactive analytes in real time.

Methods  The WINCS design incorporated a transimpedance amplifier with associated analog circuitry for FPA; a microprocessor; a Bluetooth transceiver; and a single, battery-powered, multilayer, printed circuit board. The WINCS was tested with 3 distinct recording electrodes: 1) a carbon-fiber microelectrode (CFM) to measure dopamine; 2) a glutamate oxidase enzyme–linked electrode to measure glutamate; and 3) a multiple enzyme–linked electrode (adenosine deaminase, nucleoside phosphorylase, and xanthine oxidase) to measure adenosine. Proof-of-principle analyses included noise assessments and in vitro and in vivo measurements that were compared with similar analyses by using a commercial hardwired electrochemical system (EA161 Picostat, eDAQ; Pty Ltd). In urethane-anesthetized rats, dopamine release was monitored in the striatum following deep brain stimulation (DBS) of ascending dopaminergic fibers in the medial forebrain bundle (MFB). In separate rat experiments, DBS-evoked adenosine release was monitored in the ventrolateral thalamus. To test the WINCS in an operating room setting resembling human neurosurgery, cortical glutamate release in response to motor cortex stimulation (MCS) was monitored using a large-mammal animal model, the pig.

Results   The WINCS, which is designed in compliance with FDA-recognized consensus standards for medical electrical device safety, successfully measured dopamine, glutamate, and adenosine, both in vitro and in vivo. The WINCS detected striatal dopamine release at the implanted CFM during DBS of the MFB. The DBS-evoked adenosine release in the rat thalamus and MCS-evoked glutamate release in the pig cortex were also successfully measured. Overall, in vitro and in vivo testing demonstrated signals comparable to a commercial hardwired electrochemical system for FPA.

Conclusions  By incorporating FPA, the chemical repertoire of WINCS-measurable neurotransmitters is expanded to include glutamate and other nonelectroactive species for which the evolving field of enzyme-linked biosensors exists. Because many neurotransmitters are not electrochemically active, FPA in combination with enzyme-linked microelectrodes represents a powerful intraoperative tool for rapid and selective neurochemical sampling in important anatomical targets during functional neurosurgery.